TATTOO PAPER

 

 

TATTOO PAPER

Tattoo, Leather crafting, Phone decoration, Candle, Woodwork, Jeans

 

 

 

Product

Tattoo paper

Clear - for white, bright background
White - for dark background

• Printing Papers + Adhesive Sheets
• Suitable surface : Skin, Leather, Plastic, Candle, Wood, Glass, Metal, Ceramic, Fabric...

 

Printer 

For Inkjet printer

* Use printers with a manual feed slot. 
* Under printer setting, set media type as 'label paper' or 'heavy glossy paper'. 
* The finished product has high image resolution.

 

For laser printer

* Use printers with a manual feed slot.
* Large format plotters and Samsung printers tend to be less compatible
* Under printer setting, set media type as 'label paper' or 'heavy glossy paper'.
* Compared to the inkjet, the film is thinner and looks more realistic.

 

Colour

Clear / White

There are 2 colors depending on the color of the adhesive sheet.

 

 

 

Tools

 

HOW TO USE

Step 1 EDIT

* Edit size and shape of your image. 
* You must  reverse all image & text.

 

Step 2 Print

* Print the image on the glossy side of the tattoo paper. 
* Print on the glossy side.
- Paper properties : Label paper (175g or above)
- Paper loading : Manual (multi-purpose tray)

 

Step 3 DRY

* Inkjet : Dry the ink thoroughly, then proceed. Either use hair-dryer or let it dry for an hour.
* Laser : Proceed to step 4.
 

Step 4 PREPARING ADHESIVE SHEET

* You are going attach the backing sheet to the printed sheet. 
* Peel back a small corner of the adhesive sheet.

 

Step 5 ATTACH ADHESIVE SHEET ON TOP

* Slowly take off the backing sheet and place the adhesive sheet on top until both sheets overlap.

* Remove any remaining air pockets with a ruler.

 

Step CUT

* Cut around the edges of the image.

 

Step 7 REMOVE THE ADHESIVE SHEET

Peel off the glossy adhesive film from the image.

(This is the adhesive sheet from step 4.) 

 

Step 8 ATTACH IT ON YOUR SKIN

 

Place the tattoo onto your skin. Rub well.

 

 

Step 9 WET

 

Use wet tissues or cotton to dab on the tattoo.
Dab well for about 10 seconds.

 

Step 10 COMPLEATE

 

* Once the backing starts to loosen, remove.
* Your beautiful tattoo is ready to go!

 

  

Please note that the suggested values will depend on the equipment and condition.

Run a few test trial and calibrate to achieve the best results.

 

 

Paper size

The price will depend on the paper size and quantity.

For bulk orders, or for sizes not mentioned above,

please contact Sunnyscopa (sunny@sunnyind.co.kr).

 

Other factors

How to make the tattoo last

• The tattoo could last up to 10 days depending on how you maintain it and minimise contact.
• Avoid contact 30 minutes after application.
• Inkjet tattoos do not last as much as the laser tattoos in comparison.

 

Removal

• Cleansing oil : Apply the oil over the skin where the tattoo is applied, then rub for 1-2 minutes to wipe off.
• Rubbing alcohol : use wet cloth or cotton to wipe off the tattoo.
• Sticky tape : Attach the sticky tape on the tattoo sticker, then remove (make sure you don't damage the skin)

 

Storage

• Store in dry, cool condition, free of moisture. Keep papers in a reclosable plastic bag
• The papers will last up to 1-2 years if kept enclosed on a plastic bag.
• The quality of the printout might compromise after a month from printing.

 

Additional tips

• As the film is thin and matte, it retains more natural look
• To reduce the gloss you can sunscreen or rubbing alcohol to make it matte.
• you can also draw your own tattoo on the paper.